CC Series
Chamfer Cutters
The CC Series chamfer cutters are available with or without coating. Choose from 2, 3, or 4 flutes. Available in 30, 40, 60, 82, 90, 120, and 150 degree included angles. Order TIALN coating for those hard to cut steel applications.| GWS Number | Flute / Cutter Diameter |
Shank Diameter |
Over All Length |
|---|---|---|---|
CC20125-15-30 |
1/8 | 1/8 | 1.500 |
CC20125-20-40 |
1/8 | 1/8 | 1.500 |
CC20125-30-60 |
1/8 | 1/8 | 1.500 |
CC20125-45-90 |
1/8 | 1/8 | 1.500 |
CC20125-60-125 |
1/8 | 1/8 | 1.500 |
CC30250-15-30 |
1/4 | 1/4 | 2.500 |
CC30250-20-40 |
1/4 | 1/4 | 2.500 |
CC30250-30-60 |
1/4 | 1/4 | 2.500 |
CC30250-41-82 |
1/4 | 1/4 | 2.500 |
CC30250-45-90 |
1/4 | 1/4 | 2.500 |
CC30250-60-120 |
1/4 | 1/4 | 2.500 |
CC30250-75-150 |
1/4 | 1/4 | 2.500 |
CC40375-15-30 |
3/8 | 3/8 | 2.500 |
CC40375-20-40 |
3/8 | 3/8 | 2.500 |
CC40375-30-60 |
3/8 | 3/8 | 2.500 |
CC40375-45-90 |
3/8 | 3/8 | 2.500 |
CC40375-60-120 |
3/8 | 3/8 | 2.500 |
CC40500-15-30 |
1/2 | 1/2 | 3.000 |
CC40500-20-40 |
1/2 | 1/2 | 3.000 |
CC40500-30-60 |
1/2 | 1/2 | 3.000 |
CC40500-41-82 |
1/2 | 1/2 | 3.000 |
CC40500-45-90 |
1/2 | 1/2 | 3.000 |
CC40500-60-120 |
1/2 | 1/2 | 3.000 |
CC40500-75-150 |
1/2 | 1/2 | 3.000 |