SS Series

High Performance Steel Cutting

The SS Series is a high helix 60 degree end mill, exceptional for roughing and profiling high temp allows such as Inconel, Hastalloy, Waspalloy, Titanium, etc. Note: We also have this end mill in the rougher- finisher type, priced the same as the GS series.

Standard

GWS Number	Flutes	Flute Diameter	Shank Diameter	Flute Length	Over All Length
SS30125	3	1/8	1/8	0.500	1.500
SS30156	3	5/32	3/16	0.500	2.000
SS30187	3	3/16	3/16	0.625	2.000
SS30218	3	7/32	1/4	0.625	2.500
SS30250	3	1/4	1/4	0.750	2.500
SS30281	3	9/32	5/16	0.750	2.500
SS30312	3	5/16	5/16	0.812	2.500
SS30375	3	3/8	3/8	0.875	2.500
SS30500	3	1/2	1/2	1.000	3.000
SS30625	3	5/8	5/8	1.125	3.500
SS30750	3	3/4	3/4	1.500	4.000
SS31000	3	1	1	1.500	4.000

Long

GWS Number	Flutes	Flute Diameter	Shank Diameter	Flute Length	Over All Length
SSL30125	3	1/8	1/8	0.750	2.000
SSL30156	3	5/32	3/16	0.750	2.000
SSL30187	3	3/16	3/16	0.750	2.000
SSL30218	3	7/32	1/4	1.000	3.000
SSL30250	3	1/4	1/4	1.250	3.000
SSL30281	3	9/32	5/16	1.250	3.000
SSL30312	3	5/16	5/16	1.250	3.000
SSL30375	3	3/8	3/8	1.250	3.000
SSL30500	3	1/2	1/2	2.000	4.000
SSL30625	3	5/8	5/8	2.250	5.000
SSL30750	3	3/4	3/4	2.250	5.000
SSL31000	3	1	1	2.250	5.000

Extra Long

GWS Number	Flutes	Flute Diameter	Shank Diameter	Flute Length	Over All Length
SSXL30125	3	1/8	1/8	1.125	3.000
SSXL30156	3	5/32	3/16	1.125	3.000
SSXL30187	3	3/16	3/16	1.125	3.000
SSXL30218	3	7/32	1/4	1.125	4.000
SSXL30250	3	1/4	1/4	1.500	4.000
SSXL30281	3	9/32	5/16	1.500	4.000
SSXL30312	3	5/16	5/16	1.625	4.000
SSXL30375	3	3/8	3/8	1.750	4.000
SSXL30500	3	1/2	1/2	3.000	6.000
SSXL30625	3	5/8	5/8	3.000	6.000
SSXL30750	3	3/4	3/4	3.000	6.000
SSXL31000	3	1	1	3.000	6.000